Now that the holidays are over and the kids back to school, I can start to work again on my office renovation started in November….damn it! I set myself the goal of finishing the room before the end of this month. I need to have a little pressure, if not it will never be finished. So I checked back my to do list, which you can find HERE, and some serious work has been done.
The ugly orange is gone forever, the before pictures are HERE, I added some texture with a nice patterned fabric, I purchased and placed a new lighting. I also hanged a dowel on the wall to hang large sheets of papers.
I can now also strike out my list building a room divider. It’s nice to have the kids playing next to me but I wanted to be able to separated the playroom from the office. There is a large opening between both spaces, so when we have little friends who come to play-over, it has happened more than once that the kids take my office as a second playroom or play with my craft supplies (which every time give me a heart attack).
I like that the room divider is foldable and easy to remove. Most of the time the kids can still pass from the playroom directly to the office, but we can completely separated the spaces if needed. I was also surprised to find out that it also work quite well to prevent toys from invading my space. I’m messy enough with my craft supplies 😉 no need to add kids mess!
I still need to print a nice and large wall art and to find a solution to hide the plastic drawers under the desk, is on my to do list for the next week!
The unfolded room divider is about 4 feet wide and 6 feet tall. So let’s build a room divider! Here is the material you will need:
- 3 pieces of plywood 6mm of 16″ x 64″
- 2″x 1″ wood trim 6 pieces of 16″ long and 6 other pieces of 6ft. long
- 6 hinges with screws
- Paint and brush
- wood varnish
- 2 inches nails
- wood glue
You can start painting both faces of the plywood board the color you like. Then you need to build
frames using the wood pieces. The long ones will make the verticals post. Nail and glue the small 16″ wood pieces between the posts to build the frame.
The distance between the 16″ wood pieces is 64″, you must be able to wedge the plywood board into the frame. You need to build three frames to make the room divider.
Once the frame is done place it on a flat surface. Place the plywood into the frame. The board must stay at mid height of the frame thickness, I placed some bottle caps on the floor to hold the board. Put wood glue all around the plywood edges. If possible hold the frame and the board together with big trigger clamps and wait for the glue to dry.
Once the 3 panels are build fix them together screwing hinges on the edges and done! The screen is quite easy to move around, so you can create some private corner anywhere in the house. You can also decorate the panels with wallpaper or some stencil. I wanted to add some texture to mine but it doesn’t turn out very well. So I had to paint the panels in white again to cover the mess…it will stay that way for now!